5 Wakeboarding Safety Tips for Beginners

5 Wakeboarding Safety Tips for Beginners

A man wakeboardingWakeboarding is a fun sport that can get your heart pumping and your muscles working. It can be dangerous, however, if you carelessly rip the waves without learning the safety precautions.

Any kind of water sport has its own set of rules. Sanddollarboatrentals.com agrees that knowing the rules and responsibilities of boating is crucial before you can drive one. The same would go for fishing, kayaking and, yes, wakeboarding. If you're a wakeboard newbie, be smart and follow these five safety tips to get the most fun out of your first time.

Talk to someone who knows it well

Ask them about techniques on how not to fall once you stand up. Or how to evenly distribute your weight on the boards. Tips from people who are good at it can always help.

Wear a lifejacket

This rule applies to all types of activities on the water. Unlike the ground that's more predictable, water accidents can cause more harm like drowning, hitting your head on the boat or on anything that's in the water.

Stretch and warm-up beforehand

It may look like an easy activity, but it will also require a lot of effort from your arms and legs. A full body stretch will help prepare your body for the impact of wakeboarding.

Bring a spotter

There's you, the boat driver, and then the spotter. The spotter is the one who alerts the driver in case he needs to slow down or watch out for incoming boats.

Choose your best foot

Everyone has a stronger foot that has more balance than the other. Put that foot forward when you stand on the wakeboard for better balance and control.

Remember that it may take some time before you get the hang of it. You may need a few tries before your body adjusts to the board, the speed of the pull, and balancing on the water. Be patient and don't forget that it should be fun.

Wakeboarding is a fun sport that can get your heart pumping and your muscles working. It can be dangerous, however, if you carelessly rip the waves without learning the safety precautions. Any kind of water sport has its own set of rules. Sanddollarboatrentals.com agrees that knowing the rules and responsibilities of boating is crucial before you can drive one. The same would go for fishing, kayaking and, yes, wakeboarding. If you're a wakeboard newbie, be smart and follow these five safety tips to get the most fun out of your first time. Talk to someone who knows it well Ask them about techniques on how ...

Report: Montana Tops Worst Driver List for 2017

Report: Montana Tops Worst Driver List for 2017

driving in the curveDrivers in Montana ranked as the worst drivers in the U.S. in the previous year, as the state scored low on four out of five categories, according to an analysis of CarInsuranceComparison.com.

CarInsuranceComparison based its rankings from the Department of Transportation’s National Highway Traffic Safety Administration data. It ranked each state in terms of fatality rate, failure to obey traffic rules and regulations, drunk driving, speeding and careless driving.

Worst ranking

Montana’s overall ranking partly stemmed from having the most number of accidents caused by drivers’ failure to follow traffic rules. The state also had the second highest fatality rate per 100 million vehicle miles traveled, while drunk driving accounted for 41% of car crashes. Speeding also caused 91 fatalities on the road.

However, the state ranked 29th in terms of careless driving. Mike Tooley, state transportation department director, said that fewer drivers have collided with pedestrians or pedal cyclists due to the installation of centerline and shoulder rumble strips in high-risk areas. Still, this paled in comparison to other states.

Other states

Idaho ranked as the state with the most careful drivers and Massachusetts tallied the lowest fatality rate, according to CarInsuranceComparison. Utah had the fewest drunk drivers, while drivers in Maryland were the most obedient. Iowa ranked as the state with the best drivers based on the five categories.

On the other hand, Florida drivers paid the most attention to speed limits on the road. Aside from road signs, traffic enforcement groups should invest in certain products such as a stalker radar gun for sale to improve their campaign on enforcing speed limits.

The analysis should be a wake-up call for states that ranked low on the list. While law enforcement agencies are responsible for upholding the law, drivers are just as accountable for observing road safety habits.

Drivers in Montana ranked as the worst drivers in the U.S. in the previous year, as the state scored low on four out of five categories, according to an analysis of CarInsuranceComparison.com. CarInsuranceComparison based its rankings from the Department of Transportation’s National Highway Traffic Safety Administration data. It ranked each state in terms of fatality rate, failure to obey traffic rules and regulations, drunk driving, speeding and careless driving. Worst ranking Montana’s overall ranking partly stemmed from having the most number of accidents caused by drivers’ failure to follow tra ...

Top Reasons You Should Insist on Construction Safety Products

Construction Worker Holding a Hard Hat

You do not need telling how dangerous construction work can get. However, the massive numbers of fatalities punctuating the building industry is quite a thing to note. That should be enough reason you should always insist that every employee and visitors as well are using the recommended safety gear.

Here are the other top reasons you should use these construction safety products, offered by reputable vendors such as 3S Site + Safety Supplies.

Worker Safety

The success of your construction operations hinges on the health and performance of your employees. It is, therefore, important you ensure your employees use the right safety methods, are working in a safe environment and using the right equipment for particular tasks in the recommended manner.

It is equally of great importance that you provide your visitors with safety gears to avoid cases of accidents in your work sites.

Compliance with Safety Standards

It is a national requirement that all building companies run their businesses adhering to worker health and safety standards. If you have been in business for quite a while, you must have noticed building authorities cancelling licenses of firms that fail to comply with safety standards.

You certainly are not planning to be next, so insist on using safety items and gears.

Avoiding Liabilities Related to Work site Accidents

Although you are timely in servicing your workers’ and work site’ insurance cover, you do not want to lose your employees to accidents you could have prevented from occurring. Remember, human skill is the most valuable asset to your company.

Keeping your work site safe to work in will also save on medical and legal costs you would have otherwise spent handling workplace accidents.

Considering the availability of advanced safety methods, it is quite unlikely that you should contribute to the current pace of the growing number of work site accidents and fatalities. It is advisable you insist that every person in your workplace uses appropriate construction safety products.

You do not need telling how dangerous construction work can get. However, the massive numbers of fatalities punctuating the building industry is quite a thing to note. That should be enough reason you should always insist that every employee and visitors as well are using the recommended safety gear. Here are the other top reasons you should use these construction safety products, offered by reputable vendors such as 3S Site + Safety Supplies. Worker Safety The success of your construction operations hinges on the health and performance of your employees. It is, therefore, important you ensure your ...

Welding Safety: Quick Guidelines

Welding Safety: Quick Guidelines

Image of a man wearing protective mask and coat while weldingIn the construction business, the welding process can easily combine two or more. It is cheap, making it one of the most common construction methods. But like any other methods, many risks come with the job.

Herrickindustrial.com advises protecting yourself from the hazards of welding by getting protective welding gears and supplies online. You should also consider American Welding Society’s (AWS) guidelines to ensure safety in the welding workplace.

1. Site Analysis

Worksite analysis is important to find current and potential hazards. You can use the Job Hazard Analysis (JHA) to properly check the safety of your working area.

2. Hazard Prevention

Once you finish analyzing the site, you should follow it with prevention of the risks and hazard. AWS noted you should ensure safety not only in the workplace but also health. Check proper ventilation, fire prevention, and public safety.

3. Training

Besides having working skills, you should also be able to judge the hazards that may come up. You need continuous training to ensure workplace safety and to reduce the risks of human error.

4. Management

Proper training and work ethics start from management. Regardless of one's position in the construction industry, everyone should receive enough and up-to-date training.

Welding might be one of the cheapest and common methods to get the job done. But this does not exempt it from the risks and hazards that come with any construction job. Always practice proper safety guidelines to have not only a productive but also a safe workplace.

In the construction business, the welding process can easily combine two or more. It is cheap, making it one of the most common construction methods. But like any other methods, many risks come with the job. Herrickindustrial.com advises protecting yourself from the hazards of welding by getting protective welding gears and supplies online. You should also consider American Welding Society’s (AWS) guidelines to ensure safety in the welding workplace. 1. Site Analysis Worksite analysis is important to find current and potential hazards. You can use the Job Hazard Analysis (JHA) to properly check the safe ...